Product Description
Galvanized steel wire is carbon steel wire galvanized on the surface by hot plating or electroplating method. Its performance is the same as that of straightened tempered steel wire. It can be used as unbonded prestressed reinforcement, but at least 200 ~ 300g zinc should be plated per square meter area
Galvanized steel wire surface is smooth, clean, no cracks, joints, spines, scars and rust, galvanized layer uniform, strong adhesion, corrosion resistance, toughness and elasticity are excellent. The tensile strength should be between 900mp-2200mpa (wire diameter Φ0.2mm-Φ4.4mm). The number of twists (Φ0.5mm) should be more than 20 times, and the repeated bending should be more than 13 times.
Features of galvanized steel wire
1. Strong corrosion resistance hot dip galvanized steel wire forms a solid zinc layer on the surface, which can effectively resist the erosion and corrosion of the external environment such as atmosphere and water, and extend the service life.
2. High tensile strength hot dip galvanized steel wire after treatment, its strength has been improved, can withstand greater tension and pressure, with good mechanical properties.
3. The zinc layer on the surface of hot-dip galvanized steel wire has a high hardness, which can effectively resist friction and wear, and is suitable for occasions that require frequent movement or friction.
4. Easy processing and installation hot dip galvanized steel wire has good plasticity and weldability, and can be easily cut, bend, welding and other processing and installation operations.
Product Recommendation
ELECTRO GALVANIZED IRON WIREElectro galvanized wire is supplied in forms of coil wire, spool wire, cut wire or U type wire.
Common gauge range: BWG6 - 22 - 34.
The zinc coating applied: mostly 10 to 25g/m2. Commonly 8-12g/m2 zinc coating for 0.8mm iron wire, 15-25g/m2 for 1.2mm to 1.6mm iron wire.- HOT DIPPED GALVANIZED STEEL WIRE - ASTM A 498 AND OTHER INT'L STANDARDSHot Dipped Galvanized Wire is also written as Hot Dip Galvanised Wire, made of high quality carbon steel wire with heavy zinc plating layer through thermal galvanization. This type of galvanized wire is simplified as HDG wire. Additional polyester coating or fusion bond coating layer can be applied to HDG wire for superior corrosion resistance and multi-color finishes.
- Manufacturer Z30 Galvanized WireThe tensile strength should be between 900mp-2200mpa (wire diameter Φ0.2mm-Φ4.4mm). The number of twists (Φ0.5mm) should be more than 20 times, and the repeated bending should be more than 13 times.
